FACULTY PUBLICATIONS
|
Academic Year |
International Journals |
National Journals |
International Conference |
National Conference |
Book Chapters |
Total |
|
2024-Dec2024 |
30 |
00 |
- |
- |
03 |
33 |
|
2023-2024 |
30 |
01 |
– |
– |
– |
31 |
|
2022-2023 |
31 |
04 |
– |
– |
02 |
37 |
|
2021-2022 |
20 |
08 |
– |
– |
02 |
30 |
|
2020-2021 |
37 |
13 |
06 |
– |
06 |
62 |
|
2019-2020 |
30 |
06 |
05 |
– |
04 |
45 |
|
2018-2019 |
17 |
10 |
04 |
– |
02 |
33 |
|
2017-2018 |
40 |
05 |
10 |
04 |
– |
59 |
|
2016-2017 |
36 |
03 |
14 |
– |
– |
53 |
|
2015-2016 |
37 |
01 |
11 |
13 |
– |
62 |
|
2014-2015 |
24 |
– |
03 |
02 |
– |
29 |
|
Total |
332 |
51 |
53 |
19 |
19 |
474 |
Academic Year 2024 -2025 (International Journals)
|
Sl.No
|
Authors and Description of paper with link
|
|
1 |
M. Venkata Ramana, Jalumedi Babu, Harshith Renukuntla, Harshith Reddy Kothi, Comparison of Effect of Ferritic Nitrocarburising on En-19, En-24, and En-37 Steels, E3S Web of Conferences, 552, (2024) 01045. (E3S Web of Conferences) |
|
2 |
Jalumedi Babu, Lijo Paul, Maringanti Venkata Ramana, Anjaiah Madarapu, Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method, MACS, 2024, 31791, (2024) 1560. (Mechanics of Advanced composite structures) 10.22075/macs.2024.31791.1560 |
|
3 |
Uma Maheshwera Reddy Paturi, Konidhala Nandan, Nudurupati Achintya Vamshi, Omkar Sunil Sahasra Bhojane, Goturi Sheshank Reddy, N.S. Reddy, Multi-objective parametric modelling during minimum quantity lubrication machining of Incoloy 800H, Journal of Physics: Conference Series, 2837, (2024) 012064. (Journal of Physics: Conference Series) 10.1088/1742-6596/2837/1/012064 |
|
4
|
Uma Maheshwera Reddy Paturi, Omkar Sunil Sahasra Bhojane, Goturi Sheshank Reddy, Nudurupati Achintya Vamshi, Konidhala Nandan, N.S. Reddy, Multi-objective parametric modelling during wire-cut electric discharge machining of Incoloy 800H, Journal of Physics: Conference Series, 2837, (2024) 012077 (Journal of Physics: Conference Series) 10.1088/1742-6596/2837/1/012077 |
|
5
|
Sandeep Pandre, Nitin Kotkunde, Swadesh Kumar Singh, Uma Maheshwera Reddy Paturi, Hole-flanging behaviour of dual-phase steel using conventional and two-stage incremental forming processes, Materials Research Express, 2374068X, (2024) 2379087. (Advances in Materials and Processing Technologies) doi.org/10.1080/2374068X.2024.2379087
|
|
6 |
Uma Maheshwera Reddy Paturi, Sheshank Reddy Goturi, Omkar Sunil Sahasra Bhojane, Nandan Konidhala, Achintya Vamshi Nudurupati, N.S. Reddy, Artificial neural networks modelling for surface roughness in wire electrical discharge machining of Incoloy 800H, Proceedings of the 2024 15th International Conference on IEEE, (2024). (International Conference on Computing Communication and Networking Technologies (ICCCNT)) 10.1109/ICCCNT61001.2024.10725073
|
|
7 |
Anoop Kumar Maurya, Pasupuleti Lakshmi Narayana, Uma Maheshwera Reddy Paturi, Subba Reddy Nagireddy Gari, Artificial neural network model for extracting knowledge from the electro-Fenton process for acid mine wastewater treatment, (CLEAN - Soil, Air, Water, 2024, (2024) 00029.) |
|
8 |
Reddy K.V., Vykuntarao M., Kandi K.K., Microstructure, Texture Evolution and Mechanical Characteristics of Ultrafine-Grained Structure in Friction Stir Processed Aluminum Alloys, Journal of the Institution of Engineers (India): Series D, (2024) (Journal of The Institution of Engineers (India): Series D) |
|
9 |
Reddy K.V., Vykuntarao M., Kandi K.K., Microstructure, Texture Evolution and Mechanical Characteristics of Ultrafine-Grained Structure in Friction Stir Processed Aluminum Alloys, Journal of the Institution of Engineers (India): Series D, (2024) (Journal of The Institution of Engineers (India): Series D) |
|
10 |
Krishnamraju M., Reddy P.V., Appalanaidu B., Mechanical behavior and forming characteristics of tailor-welded blanks of structural materials: a review, Multiscale and Multidiscip. Model. Exp. and Des., 7, (2024) 3133–3151. (Multiscale and Multidisciplinary Modeling, Experiments and Design) |
|
11 |
Mohammed Saleh Al Ansari, S. Kaliappan, G. Mrudula, Prashant B. Dehankar, Ramya Maranan, Putti Venkata Siva Teja, Optimizing Milling Parameters for Al7075/nano SiC/TiC Hybrid Metal Matrix Composites using Taguchi Analysis and ANN Prediction, E3S Web of Conferences, 556, (2024) 01021. (E3S Web of Conferences) |
|
12 |
Bader Al-Aifan, G. Naveen Kumar, G. Bharath Reddy, N. Aravindan, Balaram Durga Prasad, G. Sai Ram, Developing a Novel Copper Nano based Emulsified Cutting Fluid with Antimicrobial and Anticorrosion Properties – an Attempt for Sustainability, Anti corrosions Methods and Materials, Jan. (2025) (Anti Corrosion Methods and Materials)
|
|
13 |
Madhavi, Polepalli, Chandra Shekar, Kaspa, Narender, Gorentla, Harinatha Reddy, Maddika, Jaya Prakash, Kode, Varalakshmi, Machireddy Venkata and Udaya Bhaskar, Sape. "Experimental investigation of flexural strength and plane strain fracture toughness of carbon/silk fabric epoxy hybrid composites" Journal of the Mechanical Behavior of Materials, vol. 33, no. 1, 2024, pp. 20240016. (Journal of the Mechanical Behavior of Materials) |
|
14 |
N. Rao Cheepurupalli, M. Thirunavukkarasu, Gunamgari Bharath Reddy, Ram. Subbu, Dharavath Baloji, Muntather M. Hassan, Analysis of the stir casting parameters of Al 6000 series composites using TOPSIS method, E3S Web of Conferences, 552, (2024) 01087. (E3S Web of Conferences) |
|
15 |
Mohammed Saleh Al Ansari, Seenaiappan Kaliappan, G. Bharath Reddy, M. Muthukannan, Ramya Maranan, Parthasarathi Mishra, Estimation of Machining Performance in Wire EDM of Aluminum Silicon Nitride Composite: an Experimental Analysis and ANN Modeling, E3S Web of Conferences, 556, (2024) 01022. (E3S Web of Conferences) |
|
16 |
M. Saxena, P. v. v. s. E. Rao, A. Choudhary, P. S. Reddy, V. K. Sharma and V. Kumar, "Machine Learning-Based Optimization for Identifying Effective Drugs in Breast Cancer on an In Vitro Platform," 2024 4th International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE), Greater Noida, India, 2024, pp. 1756-1760 (IEEE Explore) |
|
17 |
Singh, J., Neeraj, Srinivas Reddy, P., Hasan, D.S., Alsahlanee, A.T.R., Shaik, N. (2024). IoT-Enabled Automated Smart Irrigation System Incorporating Sensor Parameters. In: Swaroop, A., Kansal, V., Fortino, G., Hassanien, A.E. (eds) Proceedings of Fifth Doctoral Symposium on Computational Intelligence. DoSCI 2024. Lecture Notes in Networks and Systems, vol 1095. Springer, Singapore. (Proceedings of Fifth Doctoral Symposium on Computational Intelligence) |
|
18 |
S. Sathish, T. Beena, V. Rahul, M. Saravana Kumar, A. Daniel Das, Banu Seema, Ramaswamy Ram, Assessment of wear behavior analysis on normalized martensitic stainless steel for sustainable applications, E3S Web of Conferences, 552, (2024) 01009. (E3S Web of Conferences) |
|
19 |
Avinash Malladi, T. Mothilal, Seenaiappan Kaliappan, Lava Kumar Polisetty, M. Muthukannan, Ramya Maranan, A Comparative Analysis of ANN and Taguchi for Enhancing Predictive Modelling and Optimisation for Al-Base Metal Matrix Composites Reinforced with Nanoparticles of SiC, E3S Web of Conferences, 556, (2024) 01024. (E3S Web of Conferences) |
|
20 |
R. Ganapathi, B. Omprakash, P. Lava Kumar, Raj Kumar Pittala, Balram Yelamasetti, D. Abhishek, Numerical Analysis of the Structure of an Aluminium Alloy Piston: A Comprehensive Study, Journal of Physics: Conference Series, 2837, (2024) 012096. (Journal of Physics: Conference Series) |
|
21 |
Beporam Iftekhar Hussain, Seenaiappan Kaliappan, Manikandan I, Lava Kumar Polisetty, M. Saravanan, Ramya Maranan, Predicting Wear Properties of Alloy 7090/SiC Nanoparticle Composites Using Artificial Neural Networks for Aerospace Application, E3S Web of Conferences, 556, (2024) 01025. (E3S Web of Conferences) |
|
22 |
Mohammed Saleh Al Ansari, A. Krishnakumari, M. Saravanan, Chappeli Sai Kiran, Seenaiappan Kaliappan, Ramya Maranan, Experimental Insights and ANN-Based Surface Roughness Prediction through Analysis of Machined Surface Quality of Al2024/SiCp Composites, E3S Web of Conferences, 556, (2024) 01023. (E3S Web of Conferences) |
|
23 |
P. Ravi Kumar, G. Shashank Reddy, P. Rohith, S. Sai Karthik, Synthesis and Effect of Epoxy in Lamination for Kevlar/E-Glass Hybrid Composites, E3S Web of Conferences, 552, (2024) 01015. (E3S Web of Conferences) |
|
24 |
P. Ravi Kumar, N. Senthil Kannan, J. Dinesh Kumar, P. Sai Pradeep, M. Iyyappan, K.K. Arun, R. Subbu, Evaluation of Wear Behavior on AISI 431 by Vacuum Annealing Method for Sustainable Applications, E3S Web of Conferences, 552, (2024) 01005. (E3S Web of Conferences) |
|
25 |
P. Ravi Kumar, S. Sathish, A.V.S. Ram Prasad, Gowthaman J, R. Ramaswamy, Saurabh Aggarwal, Jasgurpreet Singh Chohan, Hybrid Optimization of Process Parameters in Manual Metal Arc Welding for Nanostructured Hard Facing, E3S Web of Conferences, 588, (2024) 03019. (E3S Web of Conferences) |
|
26 |
Mohammed Saleh Al Ansari, S. Kaliappan, G. Vanya Sree, Pranav Kumar Prabhakar, Ramya Maranan, Pawan Devidas Meshram, Enhancing Mechanical Properties of Composites with Plasma-Treated Linear Low-Density Propylene Matrix, SiC Nanoparticles, and Carbon Fiber Filler, E3S Web of Conferences, 556, (2024) 01018. (E3S Web of Conferences) |
|
27 |
Mohammed Saleh Al Ansari, Seenaiappan Kaliappan, P. Bhargavi, Shital P. Dehankar, T. Mothilal, Ramya Maranan, Optimizing Surface Roughness in Turning of Al7072 with Nanoparticles of Carbon Metal Matrix Composite Using Taguchi Analysis and ANN Prediction, E3S Web of Conferences, 556, (2024) 01020. (E3S Web of Conferences) |
|
28 |
Arangarajan M, Seenaiappan Kaliappan, P. Jayaraman, A.L.N. Arun Kumar, S. Arulmurugan, Ramya Maranan, Optimizing Mechanical Properties of Magnesium Matrix Composites via Stir Casting for Automobile Applications, E3S Web of Conferences, 556, (2024) 01026. (E3S Web of Conferences) |
|
29 |
S.N.S. Santhosh Kumar, R. Vinoth, Rajesh Kumar, M. Jeevan Kumar, D.V.S.S.S.V. Prasad, S. Prabhu, S. Ram, Investigation of Tempered AISI 420 SS under Dry Slided Conditions for Sustainable Applications, E3S Web of Conferences, 552, (2024) 01007. (E3S Web of Conferences) |
|
30 |
S. Sathish, Bala Murali Nagarajan, Rajesh Kumar, J. Yasin, A. Daniel Das, Banu Seema, Ramaswamy Ram, Wear Assessment on AISI 410 Steel by Tempering Process for Constant Load and Speed Sustainable Applications, E3S Web of Conferences, 552, (2024) 01008. (E3S Web of Conferences) |
|
31 |
Mary Jasmin Nerella, Rajesh Kumar, Girisha L., R. Vinoth, S. Ram, Gaurav Thakur, Anjali Verma, Performance Evaluation of Carbon Fiber Reinforced with Polyethylene Terephthalate Glycol (PETG) in Additive Manufacturing, E3S Web of Conferences, 588, (2024) 01014. (E3S Web of Conferences) |
Academic Year 2024 -2025 (Book Chapters)
|
Sl.No
|
Authors and Description of paper with link
|
|
1 |
Patiola Madhusudhan, Parthasarathi Mishra, G. Vanya Sree, P.K. Dhal, C.K. Arvinda Pandian, Socrates S., Meta-Heuristic Optimization for Enhancing the Thermal Performance of Solar Energy Devices, Metaheuristics Algorithm and Optimization of Engineering and Complex Systems, (2024), DOI: 10.4018/978-9-83693-3314-3.ch006. |
|
2 |
ManiKandan I., T. Nagalakshmi, G. Vanya Sree, Kaliappan Seenaiappan, C.K. Arvinda Pandian, S. Govinda Rao, Optimizing Optical Fiber Path in Wavelength Division Multiplexing Networks Using Particle Swarm Optimization, Metaheuristic and Machine Learning Optimization Strategies for Complex Systems, (2024), DOI: 10.4018/978-9-83693-7842-7.ch016. |
|
3 |
Kishori Kasat, Shaik Meer Subhani Ali, Jayendra Gopal Thatipudi, Anupam Singh, Chappeli Sai Kiran, Aakunuri Manjula, Enhancing Rice Grain Classification Using Color Features and Self-Learning Neural Network Model, Challenges in Information, Communication and Computing Technology, CRC Press, 1st Edition, (2024), ISBN: 9781003559085. |
Academic Year 2023 -2024 (International Journals)
|
Sl.No |
Authors and Description of paper with link |
|
1 |
Mohana Krishna Peddojula, Subbarama Kousik Suraparaju, Mahendran Samykano, C.S. Vyasa Krishnaji Kadambari, Yasin Pathan , Afaf Zaza, Krishna Kanth V., Reji Kumar Rajamony, Sendhil Kumar Natarajan, Swapna Babu Budala, Synergetic integration of machining metal scrap for enhanced evaporation in solar stills: A sustainable novel solution for potable water production, Thermal Science and Engineering Progress 51 (2004) 102647 (Elsevier, SCOPUS) |
|
2 |
Sandeep Pandre, Nitin Kotkunde, Swadesh Kumar Singh, Uma Maheshwera Reddy Paturi, Hole-flanging behaviour of dual-phase steel using conventional and two-stage incremental forming processes, Advances in Materials and Processing Technologies, (2024) 1–13. (Taylor and Francis Ltd., SCOPUS) |
|
3 |
Uma Maheshwera Reddy Paturi, Sai Teja Palakurthy, Suryapavan Cheruku, B. Vidhya Darshini, N.S. Reddy, Role of Machine Learning in Additive Manufacturing of Titanium Alloys—A Review, Archives of Computational Methods in Engineering, 30, (2023) 5053–5069. (Springer Link, SCOPUS) |
|
4 |
E. Manoj Kumar, V. Mahidhar Reddy, K. Praveen Kumar, M. Srinivas Reddy, B. Ratna Sunil Role of processing temperature on microstructure, mechanical properties and corrosion behavior of fine grained AZ31 magnesium alloy produced by groove pressing, Material science and Engineering Technology (Wiley, SCOPUS) |
|
5 |
Surrya Prakash DilliBabu, Lava Kumar Polisetty, A. Ramesh Kumar, K.C. Nithin Kumar, R. Arun Kumar, V. Raviteja Kanakala, V. Prabhu, Characterization of waste from the ornamental stone processing for incarnation in clay ceramics, Materials Today proceedings, July 2023 (Elsevier, SCOPUS) |
|
6 |
Rajneesh Kumar, Palvai Srinivas Reddy, Manjeet Kharub, Gaurav Bharadwaj, Application of triangular duct in solar-assisted air-heating system with surface roughness: a numerical investigation. Environ Sci Pollut Res (2023) (Springer, SCOPUS) |
|
7 |
S. Venugopal Rao, M. Venkata Ramana, Anjaiah Madarapu, Jalumedi Babu, P. Azith, Experimental investigation on wear behaviour of heat-treated ductile cast iron, materialstoday proceedings, Elsevier August 2023 (Elsevier, SCOPUS) |
|
8 |
S.N.S. Santhosh Kumar, R. Vinoth, V. Rajender Kumar, N. Senthil Kannan, V. Chakri, M. Iyyappan, S. Ramaswamy, Surface investigation on RENE 41 alloy using EDM process, Materials Today proceedings, 2023 (Elsevier, SCOPUS) |
|
9 |
P. Arun Karthick, G. Bharath Reddy, M. Saravanakumar, B. Ramakrishna Reddy, K. Giridhar Saikiran, N. Senthil Kannan, S. Ram, Taguchi optimization on friction stir welding of nitinol composite, August 2023, Materials Today Proceedings. (Elsevier, SCOPUS) |
|
10 |
Manjeet Kharub; Sudhir Rana; P. Srinivas Reddy; Himanshu Gupta, Operational excellence through Lean Six Sigma – a case of multi-specialty hospital, International Journal of Internet Manufacturing and Services (IJIMS), Vol. 9, No. 2/3, 2023 (Inderscience, SCOPUS) |
|
11 |
Srinivas Reddy, N. Mary Jasmin, S. Hari Vignesh, B. Ramakrishna Reddy, J. Saranya, P. Sai Pradeep, S. Ramaswamy, Atomic force microscopy analysis on Hardox alloy using LBM process, Material Today Proceedings, Elsevier 2023 (Elsevier, SCOPUS) |
|
12 |
S.N.S. Santhosh,Kumar, J. Venkatesh, V. Rahul, Bh.Saroja Rani, K.Ramya Sree, V.R. Navaneeth, S. Ram, Microstructure and fracture analysis on MIG welding of Nimonic alloys, Material Today Proceedings, Elsevier 2023 (Elsevier, SCOPUS) |
|
13 |
K. Dhanalakshmi, Sultana Razia, A.L.N. ArunKumar, Yatika Gori, A. Kavitha, Kishore Mendam, Micronucleus testing and nuclear abnormalities in freshwater organisms exposed acutely and chronically to titanium dioxide nanoparticles, Material Today Proceedings, Elsevier 2023 (Elsevier, SCOPUS) |
|
14 |
B. S. Reddy, A. K. Maurya, Uma Maheshwera Reddy Paturi, Jaekyung Sung, P. L. Narayana, Hyo-Jun Ahn, K. K. Cho, N. S. Reddy, Neural Network Models for Estimating the Impact of Physicochemical and Operational Parameters on the Specific Capacity of Activated-Carbon-Based Supercapacitors, Energy and Fuels 2023, 37, 19, 15084–15094 (ACS Publishers, SCOPUS) https://doi.org/10.1063/5.0161130
|
|
15 |
Uma Maheshwera Reddy Paturi, M. Rishika Reddy, G. Pranodh Reddy, Estimation of surface roughness using artificial neural networks and fuzzy logic during extrusion-based 3D printing, AIP Conf. Proc. 2754, 030012 (2023) (AIP Publishers, SCOPUS) |
|
16 |
R. Vezhavendhan, M. Harinatha Reddy, Nageswara Rao Medikondu, N. Padmamalini, Y. Ismail, Amos Gamaleal David, G. Puthilibai, Dithieno[3,2-B:2′,3′-D] Pyrrole: A Green Alternative For Stabilising The Synthesis Of Nano Polymers, Oxidation Communications 46, No 2, 395–404 (2023). (Scibulcom Ltd. SCOPUS) |
|
17 |
B.S. Reddy, P.L. Narayana, A.K. Maurya, Uma Maheshwera Reddy Paturi, Jaekyung Sung, Hyo-Jun Ahn, K.K. Cho, N.S. Reddy, Modeling capacitance of carbon-based supercapacitors by artificial neural networks, Journal of Energy Storage 72 (2023) 108537 (Elsevier, SCOPUS) |
|
18 |
Bhimisetty AN, Korabu TBP, Pathapalli VR. 2023. Experimental Studies on Optimization of Process Parameters in Machining of EN24 Using Taguchi Method. NanoWorld J 9(S4): S252-S256. (Nano World, SCOPUS) |
|
19 |
Mohammed Anees Sheik, G. Pandu Ranga Swamy, Abhishek Dasore, Manoj Panchal, Sk. Mohammad Shareef, Characterization of phase change materials embedded with alumina and silica nanoparticles, AIP Conference proceedings, 2821, 060012 (2023) (AIP Publishers, SCOPUS) |
|
20 |
Syed Altaf Hussain, A. Stanly Kumar, D. Rognatha Rao, Ankita Tiwari, Sk. Mohammad Shareef, Machinability of AA7068/TiC metal matrix composites, AIP Conference proceedings, 2821, 060002 (2023) (AIP Publishers, SCOPUS) |
|
21 |
Yasin Pathan, Veeresh Kumar GB, Potential of Agave angustifolia marginata for composite and textile applications – A new source of natural fibre, Industrial Crops and Products Volume 203, 1 November 2023, 117213 (Elsevier, SCOPUS) |
|
22 |
Jalumedi Babu, M. Venkata Ramana, Anjaiah Madarapu, Tom Sunny, A. N. Khaleel Ahmed, Application of proximity indexed value approach for green supplier selection, AIP Conf. Proc. 2943, 020025 (2023) (AIP Publishers, SCOPUS) |
|
23 |
K Raghu Ram Mohan Reddy, G Mrudula, Manoj Kumar Elipey, Kanumuri Singaiah, G V N B Prabhakar, Investigating the role of processing temperature on the microstructure evolution, mechanical properties, and corrosion behaviour of equal channel angular pressed AZ31 Mg alloy, 2024 Eng. Res. Express 6 015002 (IOP Science, SCOPUS) |
|
24 |
Kishore Kumar Kandi, Sai Krishna Pavishetti, Sai Abhiram Padala; Study and design of archimedes screw turbine for micro hydro power generation. AIP Conf. Proc. 26 December 2023; 2943 (1): 020006 (AIP Publishers, SCOPUS) |
|
25 |
K. Jyothi, Abhishek Dasore, R. Ganapati, Sk. Mohammad Shareef, Ali J. Chamkha, V. Raghavendra Prasad, Comparative Numerical Analysis of Heat and Mass Transfer Characteristics in Sisko Al2O3-Eg and TiO2-Eg Fluids on a Stretched Surface, Frontiers in Heat and Mass Transfer 2024, 22(1), 79-105 (Tech Science Press, SCOPUS) |
|
26 |
M. Krishnamraju, P. Venkateshwar Reddy, B. Appalanaidu, R. Markendeya, Mechanical behavior and forming characteristics of tailor-welded blanks of structural materials: a review, Multiscale and Multidisciplinary Modeling, Experiments and Design (2024). (Springer, SCOPUS) |
|
27 |
Begari Vijayakrishna, G. Mrudula, Y. Sagar, P. Prakash, Durga Venkatesh Janaki, M. V. N. V. Satyanarayana, Mechanical Properties Enhancement in Friction Stir Processed AA2024 Alloy through Pin Profle Optimization, J. Inst. Eng. India Ser. D. (Springer, SCOPUS) |
|
28 |
K. Saranya, K. Haribabu, T. Venkatesh, K. G. Saravanan, Ramya Maranan, N. Rajan Electrochemical machining parameter optimization and prediction of performance using artificial neural network, International Journal on Interactive Design and Manufacturing 2024 (Springer, SCOPUS) |
|
29 |
Rajani Kanthreddy Kolagotla, B. Vijay Krishna, P. Bhargavi, Durga Venkatesh Janaki, B. Ramesh Babu, M. Vinod Babu, M. V. N. V. Satyanarayana, G. Naresh, Toward Achieving Grain Refinement in Al2014 Alloy Through Multi-pass FSP: Microstructure and Mechanical Behavior. J. Inst. Eng. India Ser. D (2024). (Springer, SCOPUS) |
|
30 |
G. Vanya Sree, P. Usha Sree, Chandra Sekhar Reddy, Performance evaluation of low heat loss piston engine fuelled with acetylene and cottonseed biodiesel, Multiscale and Multidisciplinary Modeling, Experiments and Design, 2024 (Springer, SCOPUS) |
Academic Year 2023 -2024 (National Journals)
|
Sl.No |
Authors and Description of paper with link |
|
1 |
Pathan Yasin and Veeresh Kumar GB, Unprecedented extraction and characterisation of Yucca elephantipes silver star plant fibre–An exploratory investigation, Indian Journal of Natural Products and Resources Vol. 14(4), December 2023, pp. 656-665 (NISCAIR, SCOPUS) https://10.56042/ijnpr.v14i4.6931 |
Academic Year 2022 -2023 (International Journals)
|
Sl.No |
Authors and Description of paper with link |
|
1 |
Saravanan G., Rahul V., Mahatme U., Keerthi Reddy G., Sharon T., Suresh G., Karthikeyan R., Subbiah R., Assessment of Wear Properties on Treated AISI 410 Martensitic Stainless Steel by Annealing Process. (E3S Web of Conferences & SCOPUS) |
|
2 |
Ravi Kumar P., Manivardhan Reddy K., Mahatme U., Karthik T., Saravanakumar M., Venkata Suresh J., Subbiah R. Effects of Plasma Nitriding Process on AISI 304 Stainless Steel (E3S Web of Conferences & SCOPUS) |
|
3 |
Bathini, Sidda Reddy; Alavala, Ramanjaneya Reddy; Beedalannagari, Omprakash; Dasore, Abhishek; Panchal, Manoj; Shaik, Mohammad Shareef, Investigation of Vibration Characteristics of Stir Cast Aluminum Reinforced SiC Composite Beam, Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés (SCOPUS) |
|
4 |
P. Srinivas Reddy, P. Ravi Kumar, D.V.S.S.S.V. Prasad, Bh. Saroja Rani, CH.LDS. Narayana Gupta, A. Daniel Das, Ram Subbiah, Effect of parameters and surface analysis on eglin steel by shot blasting method (SCOPUS) |
|
5 |
P. Sellamuthu, P. Srinivas Reddy, R. Ramesh, M. Haritha Kiranmai, CH.LDS. Narayana Gupta, A. Daniel Das, Ram Subbiah, Surface investigation on aluminium composite by additive manufacturing process (SCOPUS) |
|
6 |
Kishore Kumar Kandi, Gurabvaiah Punugupati, Madhukar Pagidi & C. S. P. Rao, A Novel Gelcast SiO2-Si3N4-BN Ceramic Composites for Radome Applications, Silicon, August 2022 (Springer, SCI) |
|
7 |
Kishore Kumar Kandi, Gurabvaiah Punugupati, Pagidi Madhukar, C. S. P. Rao & Murthy Chavali, Influence of Silicon Nitride (Si3N4) on Mechanical and Dielectric Properties of a Novel Fused Silica Ceramic Composites, Silicon , August 2022 (Springer, SCI) |
|
8 |
Gupta, H., Kharub, M., Kumar S,. Kumar, A., Huisingh, D., Evaluation of strategies to manage risks in smart, sustainable Agri logistics sector: a Bayesian-based group decision-making approach, Business Strategy and the Environment , August 2022 (Wiley, SCOPUS) |
|
9 |
Neeraj Kumar Jha, Naga Vamsi Krishna Jasti, Phaneendra Kiran Chaganti, Srinivas Kota, Lokesh Vijayvargy, Validity and reliability of sustainable supply chain management frameworks in Indian smart manufacturing industries, Management of Environmental Quality, August 2022 (Emarld Insight, SCOPUS) https://www.emerald.com/insight/content/doi/10.1108/MEQ-04-2022-0098/full/html |
|
10 |
Uma Maheshwera Reddy Paturi, Suryapavan Cheruku, N.S. Reddy, Artificial neural networks modelling for power coefficient of Archimedes screw turbine for hydropower applications, Journal of the Brazilian Society of Mechanical Sciences and Engineering, September, 2022 (SCIE, SCOPUS) |
|
11 |
Bharath Reddy Gunamgari , Manjeet Kharub, Experimental investigation on abrasive water jet cutting of high strength aluminium 7068 alloy, Materials Today: Proceedings, September, 2022. (Elsevier, SCOPUS) |
|
12 |
Yogesh, P., Singarayar, S. P., Rajkamal, M. D., Venkatesh, T., kumar Gupta, R., & Yatika, G, Mechanical performance of aloe vera/dharbai-based hybrid epoxy composites with enhanced NaHCO3 treatment, Materials Today: Proceedings, 2022, September, 2022 (Elsevier, SCOPUS) |
|
13 |
Sowjanya Madireddi, Experimental and Dimensional Analysis of Planar Flow Melt Spinning Process, Advances in Micro and Nano Manufacturing and Surface Engineering, 79-94, September, 2022. (Springer, SCOPUS) |
|
14 |
N. Mary Jasmin, V. Rahul, N. Senthil Kannan, V.R. Navaneeth, T.S. Senthil, S. Rahul Alex, Ram Subbiah, K. Balamurugan, “Optimization of welding strength on zirconium plate, Material Today Proceeding, Elsevier, Jan., 2023. (Elsevier, SCOPUS) |
|
15 |
ShanthiRaju, M., Birru, A.K., Madireddi, S, Influence of Vibration in the Nozzle Frame on the Ribbon Characterization in Planar Flow Melt Spinning Process, Advances in Micro and Nano Manufacturing and Surface Engineering, September, 31-40, 2023. (Springer, SCOPUS) |
|
16 |
Maheshwera Reddy Paturi U., Vanga D.G., Cheruku S., Palakurthy S.T., Kumar Jha N., Estimation of abrasive wear of nanostructured WC-10Co-4Cr TIG weld cladding using neural network and fuzzy logic approach, Materials Today: Proceedings, Elsevier, Nov. 2022 (Elsevier, SCOPUS) |
|
17 |
N. Mary Jasmin, S. Sathish, T.S. Senthil, B. Appala Naidu, A. Daniel Das, K.K. Arun, Ramaswamy Subbiah, K. Srinivasan, Investigation on natural fiber reinforced polymer matrix composite, Material Today Proceeding, elsevier, 74, Part 1, 2023, 60-63. (Elsevier, SCOPUS) |
|
18 |
Foley I., McDermott O., Rosa A., Kharub M., Implementation of a Lean 4.0 Project to Reduce Non-Value Add Waste in a Medical Device Company, Machines, MDPI, Nov. 2022 (MDPI, SCOPUS) |
|
19 |
Manjeet Kharub, Rahul S Mor, Sudhir Rana, Mediating role of manufacturing strategy in the competitive strategy and firm performance: evidence from SMEs, Benchmarking: An International Journal, November, 2022 (Emarald insight, SCOPUS) |
|
20 |
Kharub M., Gupta H., Rana S., McDermott O., Employee’s performance and Kaizen events’ success: does supervisor behaviour play a moderating role?, TQM Journal, Emerald Insight, January, 2023 (Emerald Insight) |
|
21 |
Abhiram Kalvakolanu S.D.S., Kolluru S.K.P., Paturi U.M.R., Patil A.R., Modelling erosive wear of nano-filler added carbon fibre reinforced polymer composite by artificial neural networks, Matreial Today Proceedings, Elsevier, Feb, 2023 (Elsevier, SCOPUS) |
|
22 |
P.Srinivas Reddy, Neem-castor seed oil esterification modelling:comparison of RSM and ANFIS, Material Today Proceeding, Elsevier, Feb., 2023. (Elsevier, SCOPUS) |
|
23 |
Ram Subbiah, Anshuman Kumar, V. Rahul, N. Mary Jasmin, P. Sai Pradeep, Dry sliding wear Behaviour analysis on treated AISI, Advances in Materials and Processing Technologies, Taylor and Francis, Feb., 2023. (Taylor and Francis, SCOPUS) |
|
24 |
Dr. B. K Sarkar, G.Vanya Sree, Dr. Reena Singh, thermal effects of various chemical reactions observation system, computer integrated manufacturing systems, February, 1006-5911, 2023. (Elsevier, SCOPUS) |
|
25 |
Ramprasad S., Venkata Ramana M., Manzoor Hussain M., Investigation on cotton dust-reinforced epoxy composites, Materials Today: Proceedings, Elsevier, March, 2023 (Elsevier, SCOPUS) |
|
26 |
Paturi U.M.R., Kolluru S.K.P., Kalvakolanu S.D.S.A., Prediction of weld-line width and sink-mark depth of plastic injection moulded parts using neural networks, Materials Today: Proceedings, Elsevier, March, 2023 (Elsevier, SCOPUS) |
|
27 |
Kumar, R., Kharub, M., Sharma, R., Hrisheekesha, P. N., Goel, V., Bhattacharyya, S., & Tyagi, V. V, A novel design for solar collector used for water heating application having nanofluid as working medium: CFD modeling and simulation, Environmental Science and Pollution Research, August, 2022. (Springer, SCOPUS) |
|
28 |
Bharath Reddy Gunamgari, G.Naveen Kumar, Manjeet Kharub, Cryogenic processing of AISI P20 tool steel: Evaluation of mechanical properties and microstructure, Materials Today: Proceedings, March 2023 (Elsevier, SCOPUS) |
|
29 |
Mehershilpa G., Prasad D., Sai Kiran C., Shaikh A., Jayashree K., Socrates S., EDM machining of Ti6Al4V alloy using colloidal biosilica, Material Today Proceedings, Elsevier, March, 2023 (Elsevier, SCOPUS) |
|
30 |
Prakashrao Patil S., Leela Prasad G., Sai Kiran C., Kumar S., Ramasamy V., Mohammed Ali H., Surface roughness and topography of EDM machining of Inconel 718, Material Today Proceedings, Elsevier, March, 2023 (Elsevier, SCOPUS) |
|
31 |
Uma Maheshwera Reddy Paturi, Dheeraj Goud Vanga, Rennie Bowen Duggem, Nitin Kotkunde, N.S. Reddy Sunil Dutta, Estimation of surface roughness of direct metal laser sintered AlSi10Mg using artificial neural networks and response surface methodology, Materials and Manufacturing Processes, 38(14), (2023) 1798–1808. |
Academic Year 2022 -2023 (National Journals)
|
Sl.No |
Authors and Description of paper with link |
|
1 |
Dr. Manjeet Kharub, Comparative Analysis and Ranking of Selected Bio-Fuels, CVR Journal of Science and Technology, December, 2022.
|
|
2 |
Neeraj Kumar Jha, Analysis of a Feasible Gate Location in Injection Mold for Plastic Cloth Peg: New Product Development, CVR Journal of Science and Technology, December, 2022.
|
|
3 |
A. Suresh, Mechanical Characterization and Evaluation of Effects of Epoxy in Lamination for Kevlar Composites, CVR Journal of Science and Technology, December, 2022.
|
|
4 |
Mada Rukmini Sai Rupa Sri, Modelling and Analysis of Domestic Windmill Turbine Blade, CVR Journal of Science and Technology, December, 2022.
|
Academic Year 2021 -2022 (International Journals)
|
Sl.No |
Authors and Description of paper with link |
|
1 |
M. Rishika Reddy, Nukala Sai Sree, G. Pranodh Reddy, A. Suresh. “Performance Evaluation of Gasoline and E50 for Inter Combustion Engine.” International Journal of Research in Aeronautical and Mechanical Engineering, Volume 9, Issue 6, Pages 1-14, June 2021. |
|
2 |
Uma Maheshwera Reddy Paturi, Suryapavan Cheruku, Venkat Phani Kumar Pasunuri, Sriteja Salike, N.S. Reddy, Srija Cheruku. “Machine learning and statistical approach in modeling and optimization of surface roughness in wire electrical discharge machining.” Machine Learning with Applications, Volume 6, Page 100099, June 2021. |
|
3 |
Uma Maheshwera Reddy Paturi, N.S. Reddy, Suryapavan Cheruku, Suresh Kumar Reddy Narala, Kwon Koo Cho, M.M. Reddy. “Estimation of coating thickness in electrostatic spray deposition by machine learning and response surface methodology.” Surface & Coatings Technology, Volume 422, Page 127559, July 2021. (SCIE, SCOPUS) |
|
4 |
B. Vidhya Darshini, Ch. Srija, J. Srujana, D. Arun Sai, A. Suresh. “Modeling and CFD analysis of F1 rear wing.” International Journal of Advance Research and Innovative Ideas in Education, Volume 7, Issue 4, Pages 466-473, July 2021. http://ijariie.com/AdminUploadPdf/Modeling_and_CFD_analysis_of_F1_rear_wing_ijariie14745.pdf |
|
5 |
A. Suresh, Beera Satish Ben. “Investigation of Reliability & Availability for the Heavy Earth Machinery Using Power Law Process.” Journal of Tianjin University Science and Technology, Volume 54, Issue 7, Pages 339-348, July 2021. (SCOPUS) |
|
6 |
Uma Maheshwera Reddy Paturi, Ankathi Yash, Sai Teja Palakurthy, and N. S. Reddy. “Modeling and optimization of machining parameters for minimizing surface roughness and tool wear during AISI 52100 steel dry turning.” Materials Today: Proceedings, August 2021. (Elsevier, SCOPUS) |
|
7 |
A. Suresh, N. Keerthi, N. Sai Sree, M. Rishika Reddy. “Design and Analysis of Three Rotor Rotary Engine.” International Research Journal of Modernization in Engineering Technology and Science, Volume 3, Issue 9, Pages 314-323, September 2021. |
|
8 |
A Suresh, N Sai Sree, N. Naga Sai, K Nimmitha, K S Sibin Kumar. “Strategic Evaluation of Business Planning, Financial Planning and Controlling Methods.” International Journal of Research Publication and Reviews, Volume 2, Issue 9, Pages 251-258, September 2021. |
|
9 |
D.Raajith Sandeep, CH.Sweekruthi, K.Pavan Kalyan Yadav, A. Suresh. “Standardization of Work and Time using Segmental Workmen for Engineering Applications.” EPRA International Journal of Multidisciplinary Research, Volume 7, Issue 9, Pages 205-210, September 2021. https://eprajournals.com/jpanel/upload/909pm_32.EPRA%20JOURNALS%208460.pdf |
|
10 |
A. Suresh, Md. Muzammil, N. Naga Sai, M. Pavan Kumar Reddy, Kruthivas Reddy. “Modeling and CFD analysis of Formula 1 front wings.” International Journal of Innovative Science, Engineering & Technology, Volume 8, Issue 9, Pages 163-174, September 2021. |
|
11 |
B. Appala Naidu, K T Balaram Patil, A.Suresh. “Machining process parameters optimization and evaluation of tool life for turning of HASTELLOY C276 rods.” International Journal of Innovative Science, Engineering & Technology, Volume 8, Issue 9, Pages 175-183, September 2021. |
|
12 |
Manjeet Kharub, Samved Kattekola, and Sai Krishna Pendyala. “80/20 your organization using AHP for quantitative decision making.” Materials Today: Proceedings, September 2021. (SCOPUS) |
|
13 |
Manjeet Kharub, Bandi Ruchitha, Shashank Hariharan, and N. Shanmukha Vamsi. “Profit enhancement for small, medium scale enterprises using Lean Six Sigma.” Materials Today: Proceedings, September 2021. |
|
14 |
Bharti Sharma, Rakhi Arora, and Manjeet Kharub. “Critical Success Factors affecting the Restaurant Industry: Insights from Restaurant Managers.” FIIB Business Review, October 2021. (ESCI, SCOPUS) |
|
15 |
Gujar Anantkumar Jotiram, Sivakumar Ponnusamy, Malini.P, And Chappeli Sai Kiran. “Design, Analysis, and Bio Manufacturing of Disc Brakes with CNC For Reactor Safety.” International Journal of Biology Pharmacy and Allied Sciences, Volume 10, Special Issue 11, Pages 1381-1392, November 2021. https://ijbpas.com/pdf/2021/November/MS_IJBPAS_2021_NOV_SPCL1120.pdf |
|
16 |
Sandeep Narula, Sudhir Rana, Shakul Srivastava, and Manjeet Kharub. “Improving firm performance using market orientation and capabilities: a case study approach.” South Asian Journal of Business Studies, Pages 175-183, December 2021. (ESCI, SCOPUS) |
|
17 |
Uma Maheshwera Reddy Paturi,Vidhya Darshini B, and N. S. Reddy. “Progress of machinability on the machining of Inconel 718: A comprehensive review on the perception of cleaner machining.” Cleaner Engineering and Technology, Volume 5, Page 100323, December 2021. |
|
18 |
A. K. Maurya, M. Nagamani, Seung Won Kang, Jong-Taek Yeom, Jae-Keun Hong, Hyokyung Sung, C. H. Park, Paturi Uma Maheshwera Reddy, and N. S. Reddy. “Development of artificial neural networks software for arsenic adsorption from an aqueous environment.” Environmental Research, Volume 203, Page 111846, January 2022. (Elsevier, SCOPUS) |
|
19 |
Manjeet Kharub, Rahul S. Mor, Sudhir Rana. “Mediating role of manufacturing strategy in the competitive strategy and firm performance: evidence from SMEs.” Benchmarking: An International Journal, January 2022. (Emerald, SCOPUS) |
|
20 |
Naga Vamsi Krishna Jasti, Neeraj Kumar Jha, Phaneendra Kiran Chaganti, Srinivas Kota, Sustainable production system: literature review and trends, Management of Environmental Quality, January, 2022 (Emerald, SCOPUS) |
Academic Year 2021 -2022 (National Journals)
|
Sl.No |
Authors and Description of paper with link |
|
1 |
Dr. Gaurav Sharma and Dr. Manjeet Kharub. “Low Power Fast and Accurate Localization Algorithm in Wireless Sensor Networks.” CVR Journal of Science and Technology, Volume 20, Pages 56-60, June 2021. |
|
2 |
Neeraj Kumar Jha, G. Bharath Reddy and Vidyanand Kumar. “Design and Process Analysis of Single Cavity Injection Molding Die for Plastic Wing Nut.” CVR Journal of Science and Technology, Volume 20, Pages 129-134, June 2021. |
|
3 |
P. V. Sai Swaroop and A. Suresh. “Effects of Fiber Orientation on Mechanical Properties and Analysis of Failures for Kevlar Epoxy Reinforced Composites.” CVR Journal of Science and Technology, Volume 20, Pages 142-146, June 2021. |
|
4 |
G. Naveen Kumar and G. Bharath reddy.”Characterization of ZnO-TiO2 Hybrid Nano based SAE 15W-40 Oil.” CVR Journal of Science and Technology, Volume 20, Pages 147-150, June 2021. |
|
5 |
A. Suresh. “Mechanical Characterization of Kelvar Epoxy Composites Derived from 3D Printing Process.” CVR Journal of Science and Technology, Volume 21, Pages 138-143, December 2021. |
|
6 |
Sarat Kumar Sahoo. “Design and Fabrication of Seabin Project for Efficient Collection of Water Waste using Solar Energy.” CVR Journal of Science and Technology, Volume 21, Pages 144-147, December 2021. |
|
7 |
B. Appala Naidu, A. Suresh. “Optimizing the Process Parameters for Controlling the Vibration in Turning of TWIP Steel Rod.” CVR Journal of Science and Technology, Volume 21, Pages 148-154, December 2021. |
|
8 |
G. Mrudula, Sk. Mohammad Shareef, P. Bhargavi. “Effect of Water level on Mechanical Properties of Underwater Friction Stir Welded Aluminium Alloys.” CVR Journal of Science and Technology, Volume 21, Pages 159-164, December 2021. |
Academic Year 2021 -2022 (Book Chapters)
|
Sl.No |
Authors and Description of paper with link |
|
1 |
Gowdagiri Venkatesha Prasanna, Rapolu Srilekha, Achyutuni Venkata Naga Sri Harsha, Vemula Sunil Kumar. “Surface Alteration and Effect of Fiber Amount on the Optimization of Palmyra and Moringa Oleifera Fibrils Fortified Composites.” Recent Advances in Manufacturing, Automation, Design and Energy Technologies, Lecture Notes in Mechanical Engineering, Springer, Singapore, Pages 285-294, October 2021. (SCOPUS) |
|
2 |
Animesh Sinha, Vidyanand Kumar, and Arindam Sinha. “An Experimental Investigation on Adhesivity of Modified Epoxy at Different Curing Temperature.” Composite Materials for Extreme Loading, Lecture Notes in Mechanical Engineering, Springer, Singapore, Pages 119-128, November 2021. (SCOPUS) |
Academic Year 2020 -2021 (International Journals)
|
Sl.No |
Authors and Description of paper with link |
|
1 |
Abilash Desai, C. M. Sharanaprabhu, and S. K. Kudari. “Glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode (I/II) load using FPB specimen.” Frattura ed Integrità Strutturale, Volume 14, Issue 53, Pages 426-433, July 2020. (ESCI & SCOPUS) https://www.fracturae.com/index.php/fis/article/view/2796/3049 |
|
2 |
V. Rajender Kumar, P. V. Ramana. “CFD Analysis of Heat transfer Enhancement in a Horizontal Circular Tube using Rectangular type Insert in Turbulent Region.” International Journal of Scientific Development and Research, Volume 5, Issue 7, Pages 139-149, July 2020. (SCOPUS) |
|
3 |
Uma Maheshwera Reddy Paturi, Suryapavan Cheruku, Venkat Phani Kumar Pasunuri, and Sriteja Salike. “Modeling of tool wear in machining of AISI 52100 steel using artificial neural networks.” Materials Today: Proceedings, July 2020. (SCOPUS) |
|
4 |
Uma Maheshwera Reddy Paturi, and Suryapavan Cheruku. “Application and performance of machine learning techniques in manufacturing sector from the past two decades: A review.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
5 |
Rajneesh Kumar, Manjeet Kharub, Vidyanand Kumar, and Varun. “Heat augmented due to array of protrusions on absorber plate in solar heat exchanger.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
6 |
P. V. Ramana, Manjeet Kharub, Jaspreet Singh, and Jagdeep Singh. “On material removal and tool wear rate in powder contained electric discharge machining of die steels.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
7 |
Satyender Singh, Manjeet Kharub, Jagdeep Singh, Jaspreet Singh, and Vivek Jangid. “Brief survey on mechanical failure and preventive mechanism of turbine blades.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
8 |
A. Suresh, and G. Diwakar. “Optimization of process parameters in plasma arc cutting for TWIP steel plates.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
9 |
Sowjanya Madireddi. “Effect of offset of the crucible center with wheel center during planar-flow-melt-spinning process.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
10 |
Manjeet Kharub. “Integrating the HACCP and SPC for hazard control and process improvement: a case of pharmaceutical industry.” International Journal of Pharmaceutical and Healthcare Marketing, September 2020. (ESCI & SCOPUS) |
|
11 |
Abilash Desai, C. M. Sharanaprabhu, and S. K. Kudari. “Study on translaminar fracture toughness under mixed mode I/II load for (0/45)° orientation unidirectional glass/epoxy composite.” Materials Today: Proceedings, September 2020. (SCOPUS) |
|
12 |
Uma Maheshwera Reddy Paturi, Sumanth Methuku, Sumanth S. Siripragada, Yeshwanth Sangishetty, and Rakesh Kumar Gunda. “Finite element simulations of machinability parameters in turning of Inconel 718.” Materials Today: Proceedings, September 2020. (SCOPUS) |
|
13 |
Uma Maheshwera Reddy Paturi, Suryapavan Cheruku, and Satwik Reddy Geereddy. “Process modeling and parameter optimization of surface coatings using artificial neural networks (ANNs): State-of-the-art review.” Materials Today: Proceedings, October 2020. (SCOPUS) |
|
14 |
C. Anand Badrish, Ayush Morchhale, Nitin Kotkunde, Swadesh Kumar Singh, and Uma Maheshwera Reddy Paturi. “Influence of lubrication on forming limit diagram for Inconel 625 alloy at elevated temperatures.” Materials Today: Proceedings (2020). (SCOPUS) |
|
15 |
Uma Maheshwera Reddy Paturi, Harish Devarasetti, N. S. Reddy, Nitin Kotkunde, and B. K. Patle. “Modeling of surface roughness in wire electrical discharge machining of Inconel 718 using artificial neural network.” Materials Today: Proceedings, October 2020. (SCOPUS) |
|
16 |
Brijesh Patel, B. K. Patle, and UM Reddy Paturi. “Experimental investigation of fatigue life of Inconel 617 at elevated temperature.” Materials Today: Proceedings, October 2020. (SCOPUS) |
|
17 |
A. Suresh, P. Bhargavi, and M. Kiran Kumar. “Simulation and mechanical characterization on kevlar epoxy reinforced composite with silicon carbide filler.” Materials Today: Proceedings, October 2020. (SCOPUS) |
|
18 |
M. Venkata Ramana, G. V. Rao, B. Shankar Rao, and B. Shiva Prasad. “Design & development of durable low cost housing from glass fiber composites.” Materials Today: Proceedings, October 2020. (SCOPUS) |
|
19 |
M. Venkata Ramana, C. Sai Kiran, and Veeredhi Vasudeva Rao. “Experimental investigation on the time-temperature history of Al-Si alloy while cooling in fresh and reclaimed silicate sand mould.” Materials Today: Proceedings, October 2020 (SCOPUS) |
|
20 |
G. Naveen Kumar, Bader Al-Aifan, R. Parameshwaran, and V. Vinayaka Ram. “Facile synthesis of microencapsulated 1-dodecanol/melamine-formaldehyde phase change material using in-situ polymerization for thermal energy storage.” Colloids and Surfaces A: Physicochemical and Engineering Aspects: 125698, October 2020. (SCIE & SCOPUS) |
|
21 |
Abilash Desai, C. M. Sharanaprabhu, and S. K. Kudari. “Experimental investigation to evaluate total energy release rate for unidirectional glass/epoxy composite under Mixed mode-I/II load.” Sādhanā, Volume 45, Issue 1, Pages 1-8, October 2020. (SCIE & SCOPUS) |
|
22 |
Sowjanya Madireddi, P. Ashish, B. Arvind Reddy, and D. Abhishek. “Heat transfer analysis of a multilayered fabric-material assembly exposed to halogen lamp heating.” Materials Today: Proceedings, November 2020. (SCOPUS) |
|
23 |
Saikiran Chary Nalband, Kalyan Pamidimukkala, Rakesh Kumar Gunda, and Uma Maheshwera Reddy Paturi. “Effect of minimum quantity solid lubrication (MQSL) parameters on cutting force and temperature during turning of EN31 steel.” Materials Today: Proceedings, November 2020. (SCOPUS) |
|
24 |
Neeraj Kumar Jha, G. Avinash, and V. Siddharth. “Design and structural analysis of plastic chain link with polypropylene and polyoxymethylene material.” Materials Today: Proceedings, November 2020. (SCOPUS) |
|
25 |
Sk. Mohammad Shareef, A.L.N. Arun Kumar, T. Venkatesh. “Design and Analysis of Leaf Spring for Material Optimization.” International Journal of Engineering and Techniques, Volume 6, Issue 6, Pages 1-5, November 2020. |
|
26 |
A.L.N. Arun Kumar, T. Venkatesh, Sk. Mohammad Shareef. “Structural Analysis of Regenerative Braking System.” International Journal of Engineering and Techniques, Volume 6, Issue 6, Pages 1-6, November 2020. |
|
27 |
P. Srinivas Reddy. “Transformation of Existing SI Engine to Work with Pressurized Air.” International Journal for Modern Trends in Science and Technology, Volume 6, Issue 11, Pages 79-86, November 2020. |
|
28 |
T. Venkatesh, Sk. Mohammad Shareef, A. L. N. Arun Kumar. “Design and Analysis of Crane Hook with Different Materials.” International Journal of Trend in Scientific Research and Development, Volume 5, Issue 1, Pages 802-807, December 2020. |
|
29 |
Mr. A. Suresh, Ms. G. Rithika, Ms. J. Srujana, Mr. M. Pavan Kumar Reddy. “Evaluating the Effects of Residual Stresses on CNC Turning For TWIP Steel Plates.” International Research Journal of Modernization in Engineering Technology and Science, Volume 2, Issue 12, Pages 182-188, December 2020. https://irjmets.com/rootaccess/forms/uploads/IRJMETS108584.pdf |
|
30 |
Marripally Ravikumar. “Investigation on the Creep Behaviour of Friction Stir Processed Al-Ni Composite Material.” International Journal of Trend in Scientific Research and Development, Volume 5, Issue 1, Pages 1126-1129, December 2020. |
|
31 |
Velpuri Lavanya, M Venkata Ramana. “Stress Analysis on Lumbar Vertebrae.” International Journal of Advance Research and Innovative Ideas in Education, Volume 6, Issue 6, Pages 2240-2244, December 2020. |
|
32 |
Vidyanand Kumar, Animesh Sinha, Rajesh Kumar. “Investigation of FSW Process Parameters by Taguchi Method of 6061- 6082 Aluminium alloys.” International Journal of Advance Research and Innovative Ideas in Education, Volume 6, Issue 6, Pages 1074-1080, December 2020. http://ijariie.com/AdminUploadPdf/INVESTIGATION_OF_FSW_PROCESS |
|
33 |
Rajesh Kumar, Vidyanand Kumar, Animesh Sinha. “2-D Heat Conduction Analysis of a Square Slab for Steady and Transient Behaviour Using Various Iterative Solvers.” International Journal of Scientific Research and Engineering Development, Volume 3, Issue 6, Pages 1218-1223, December 2020. |
|
34 |
Uma Maheshwera Reddy Paturi, G. Naveen Kumar, and V. S. Vamshi. “Silver nanoparticle-based Tween 80 green cutting fluid (AgNP-GCF) assisted MQL machining-An attempt towards eco-friendly machining.” Cleaner Engineering and Technology, Volume 1, Article 100025, December 2020. |
|
35 |
Effect of Tool Material on Mechanical Properties of Friction Stir Welded Dissimilar Aluminium Joints, Materials Today: Proceedings (SCOPUS) |
|
36 |
Effect of friction-stir welding parameters on the welding, Materials Today: Proceedings (SCOPUS) |
|
37 |
Optimization of Process parameters based on RSM and GRA method for Machining of Inconel-600 by Electric Discharge Machining, Materials Today: Proceedings (SCOPUS) |
Academic Year 2020 -2021 (National Journals)
|
Sl no |
Authors and Description of paper with link |
|
1 |
P. Lava Kumar. “Yttrium Chloride as Corrosion Inhibitor for 6061Al- SiC Composites in 1:1 mixture of HNO3 + HCl.” CVR Journal of Science and Technology, Volume 18, Pages 119-123, June 2020. |
|
2 |
A. Suresh. “Hazard Rate Diagnosis of Heavy Earth Moving Machinery using 2-parameter Weibull Analysis.” CVR Journal of Science and Technology, Volume 18, Pages 124-131, June 2020. |
|
3 |
Sk. Mohammad Shareef, A.L.N. Arun Kumar, T. Venkatesh. “CFD Analysis of DI Diesel Engine using Exhaust Gas Recirculation.” CVR Journal of Science and Technology, Volume 18, Pages 132-137, June 2020. |
|
4 |
Pathalavathi Bhaskar, Sarat Kumar Sahoo. “Optimization of Machining Process by Desirability Function Analysis (DFA): A Review.” CVR Journal of Science and Technology, Volume 18, Pages 138-143, June 2020. |
|
5 |
Jagdeep Singh, Manjeet Kharub and Sarat Kumar Sahoo. “Analysis of Powder-Mixed EDM Process Characteristics of Tungsten Carbide alloy by Using GRA Technique.” CVR Journal of Science and Technology, Volume 19, Pages 102-106, December 2020. |
|
6 |
M. Udaya Kiran, Sk. Mohammad Shareef and A. L. N. Arun Kumar. “Study of Condensation on PDMS Substrates for Enhanced Solar Still.” CVR Journal of Science and Technology, Volume 19, Pages 107-112, December 2020. |
|
7 |
C. Sai Kiran, M. Ravi Kumar, P. Srinivas Reddy and T. Venkatesh. “Modelling and Analysis of Brake Drum using ANSYS Workbench.” CVR Journal of Science and Technology, Volume 19, Pages 113-117, December 2020. |
|
8 |
Sk. Mohammad Shareef, A.L.N. Arun Kumar, T. Venkatesh and M. RaviKumar. “Performance and Emission Characteristics of Diesel Engine by Semi Ellipsoidal Arc Grooves on Piston Crown.” CVR Journal of Science and Technology, Volume 19, Pages 118-122, December 2020. |
|
9 |
Vidyanand Kumar, Dr. Manjeet Kharub and Neeraj Kumar Jha. “Parametric Optimization of Submerged Arc Welding using Taguchi Method on P91 Steel.” CVR Journal of Science and Technology, Volume 19, Pages 123-128, December 2020. |
|
10 |
Mada Rukmi Sai Rupa Sri and N. Ankitha. “Modelling of a Banana Fiber Extraction Machine.” CVR Journal of Science and Technology, Volume 19, Pages 129-132, December 2020. |
|
11 |
T. Venkatesh, A. L. N. Arun Kumar, Sk. Mohammad Shareef and P. Lava Kumar. “Structural Analysis of Centrfugal Compressor Impeller using ANSYS.” CVR Journal of Science and Technology, Volume 19, Pages 133-137, December 2020. |
|
12 |
P. Srinivas Reddy. “Enery Audit Along with Energy Saving Implementations for HVAC Systems.” CVR Journal of Science and Technology, Volume 19, Pages 138-143, December 2020. |
|
13 |
A. Suresh, Dr. G. Diwakar and B. Appala Naidu. “Reliability Design and Maintenance Formulation for Dumpers used in Mining Industries.” CVR Journal of Science and Technology, Volume 19, Pages 144-150, December 2020. |
Academic Year 2020 -2021 (International Conferences)
|
slno |
Authors and Description of paper with link |
|
1 |
Mada Rukmini Sai Rupa Sri, Sk. Mohammad Shareef, N. Ankitha, Design and Fabrication of Solar Powered Grass Cutting Machine, International Conference on Recent Advances in Mechanical, Civil & Electrical Engineering, ICRAMCE 2020, St. Martin’s Engineering College, Secunderabad, 19-20 June 2020. https://www.smec.ac.in/assets/images/ICRAMCE%20-%202020%20Proceedings.pdf |
|
2 |
Mada Rukmini Sai Rupa Sri, Mohammad Shareef Sk & Ankitha N, Design and Structural Analysis of IC Engine Piston, First International Virtual Conference on Advanced Materials and Manufacturing Process, Kalasalingam Academy of Research and Education, Tamil Nadu, 20th June 2020. |
|
3 |
Sk Mohammad Shareef, A.L.N Arun Kumar, T. Venkatesh. “Experimental Investigation of Semi Elliptical arc groves on Piston crown of Direct Injection Diesel Engine using Apricot oil.” International Conference on Advances in Sustainable Technologies ICAST-2020, Lovely Professional University, Punjab, 6th – 7th November 2020. |
|
4 |
P.Sadanandam, P.Srinivas Reddy and Vijaya Sarathi Timmapuram. “Stress distribution on turbine blade along with root at several operating speeds.” 1st International Conference on Research and Advances in Mechanical Engineering, Vignan Institute of Technology and Science, Deshmukhi, 10th & 11th December 2020. |
|
5 |
Vidyanand Kumar, Manjeet Kharub, Animesh Sinha. “Modeling and Optimization of Turning Parameters during Machining of AA6061 composite using RSM Box-Behnken Design.” International Conference on Research and Advances in Mechanical Engineering, Vignan Institute of Technology and Science, Deshmukhi, 10th & 11th December 2020. |
|
Fifth International Online Conference on Reuse and Recycling of Materials (Polymers, Wood, Paper, Leather, Glass, Metals, Ceramics, Semi Conductors, Water etc) and their products (ICRM 2020 ), Mahatma Gandhi University, Kottayam, Kerala, 2020), 11th-13th December 2020. |
Academic Year 2020 -2021 (Book Chapters)
|
slno |
Authors and Description of paper with link |
|
1 |
G. Venkatesha Prasanna, Tirunagari Jayadeep, and Nikhitha Poornabhodha. “Chemical Treatment, Influence of Fiber Content, and Optimization of Hybrid Natural Fiber-Reinforced Composites.” Advances in Materials and Manufacturing Engineering, Springer Proceedings in Materials, Volume 7, Springer, Singapore, Pages 325-335, September 2020. |
|
2 |
Gowdagiri Venkatesha Prasanna, A. Nikhil Nihar, G. Lokesh, and N. Naga Sai. “Fiber Surface Treatment and Quantity, Impact on the Performance of Biocomposites.” Recent Trends in Mechanical Engineering, Lecture Notes in Mechanical Engineering, Springer, Singapore, Pages 321-331, October 2020. (SCOPUS) |
|
3 |
G. Venkatesha Prasanna. “Surface modification, characterization and optimization of hybrid bio composites.” Fatigue, Durability, and Fracture Mechanics, Lecture Notes in Mechanical Engineering, Springer, Singapore, Pages 623-632, October 2020. (SCOPUS) |
|
4 |
Gowdagiri Venkatesha Prasanna “Impact of Fiber Length and Chemical Alteration on the Mechanical Properties of Blended Composites.” In Fatigue, Durability, and Fracture Mechanics, Lecture Notes in Mechanical Engineering, Springer, Singapore, Pages 633-643, October 2020. (SCOPUS) |
|
5 |
C. M. Sharanaprabhu, Shashidhar K. Kudari, and Mujebur Rehaman. “Effect of Loading Angle on 3D Stress Intensity Factor and T-stress in a Compact Tension Shear (CTS) Fracture Specimen.” Fatigue, Durability, and Fracture Mechanics, Lecture Notes in Mechanical Engineering, Springer, Singapore, Pages 525-539, October 2020. (SCOPUS) |
|
6 |
N. Ankitha, and M. R. S. Rupa Sri. “Design and Analysis of Shock Absorber.”Recent Trends in Mechanical Engineering, Springer, Singapore, Pages 433-444, October 2020. (SCOPUS) |