Process Parameter Optimization of CO2 Moulding Process for Better Permeability

  • M.Venkata Ramana CVR college of Engineering/Mechanical Department,Hyderabad.

Abstract

Present investigation deals with optimization of process parameters of CO2moulding process for better permeability. Percentage of sodium silicate, quantity of CO2 gas, mixing time and percentage of coal dust are considered as factors. Each factor is considered at two levels. Taguchi method has been used for the purpose. It is observed that sodium silicate and coal dust addition are the significant factors affecting permeability. Optimum condition is verified through confirmation experiments.

Published
2015-12-31
Issue
Vol 9 (2015): CVR Journal of Science and Technology
Section
Articles
Copyright (c) 2015 Creative Commons Licence CVR Journal of Science & Technology by CVR College of Engineering is licensed under a Creative Commons Attribution 4.0 International License.